A leak does not always mean you need a new roof. Barnes N’ Roofs inspects and repairs roofs across San Antonio, Austin and the communities around our New Braunfels base.
A practical repair plan
Tell us where you see the problem and when it happens. We inspect the affected area and the surrounding roof, then explain the repair we recommend.
A new stain, missing shingles or a recurring leak is worth a closer look. Roof coverings, flashing, valleys, vents and other openings can all be part of the assessment. A photo of the problem is a useful starting point.
A roof problem does not automatically mean a full replacement. If a focused repair can address the cause, we explain that option. If the roof condition points to a larger scope, we explain why.
We welcome smaller repair requests as well as complex roof problems. Tell us the property’s city, roof type if known, and what you have noticed. We serve San Antonio, Austin and surrounding communities from New Braunfels.
A completed San Antonio repair
Completed in August 2026, this repair combined local shingle replacement with vent, decking and flashing work. Six detail photos show the visible shingle patches, roof openings and roof-to-wall area, including kick-out flashing beside the gutter.
From our project gallery
Seven photos follow local repairs at the chimney, valley and individual tile courses. Open the case study to see exposed flashing and underlayment alongside reinstated tile details.
See the Georgetown repairReal repair work
Open a project to see the affected area, the repair scope and photographs from the job.
Austin, Texas
Missing shingles and tree-contact damage repaired, with attention to vents, exposed fasteners and lifted shingles.
View repair photos
Bulverde, Texas
A focused 5V metal roof repair rebuilt the affected valley and roof-to-wall area, including damaged decking and flashing.
View repair photos
Bulverde, Texas
A roof-to-wall leak repair included opening the siding, replacing flashing and restoring the affected shingles.
View repair photos
Converse, Texas
A leaking skylight was replaced, with the opening prepared, flashing installed and surrounding shingles restored.
View repair photos
New Braunfels, Texas
Two leaking vents were replaced along with deteriorated decking beneath them, followed by new underlayment and shingle repairs.
View repair photos
New Braunfels, Texas
Targeted repairs addressed a metal-roof transition, valley, vent flashings and two pipe boots.
View repair photos
Converse, Texas
A leaking pipe boot was replaced with new underlayment and restored shingles around the roof penetration.
View repair photos
San Antonio, Texas
An old metal chimney cap was removed and replaced with a custom-fabricated cap and new gasketed fasteners.
View repair photos
Cibolo, Texas
Missing and wind-damaged shingles were replaced, with a roof tune-up covering lifted shingles and vent flashing.
View repair photos
Live Oak, Texas
A blown-off ridge vent was replaced along with affected underlayment, field shingles and ridge-cap shingles.
View repair photos
San Antonio, Texas
Old metal roofing and a leaking transition were removed. Decking and a two-ply modified-bitumen assembly rebuilt the repair area.
View repair photos
San Antonio, Texas
The opened roof exposed damaged wood. New supports, decking, underlayment and shingles rebuilt the affected area.
View repair photos
Universal City, Texas
A heavily patched transition was rebuilt with decking, flashing, membrane and replacement shingles.
View repair photos
San Antonio, Texas
Damaged decking around the pipe was replaced. New flashing and underlayment were installed, then the roof tiles were reset.
View repair photos
New Braunfels, Texas
The pipe area was opened and damaged decking replaced. Underlayment, flashing and shingles restored the repair area.
View repair photos
Austin, Texas
Temporary patching gave way to new underlayment and replacement shingles across the damaged section.
View repair photos
Helotes, Texas
Deteriorated fascia and trim were replaced and finished. The job also included resetting roof-edge components and installing gutters.
View repair photos
San Antonio, Texas
Metal cap flashing was installed at two roof-edge areas to secure the edges where shingles had lifted.
View repair photos
San Antonio, Texas
Ridge-cap work and fastener repairs addressed vulnerable areas. Close-up photos show the flashing detail before and after the work.
View repair photos
San Antonio, Texas
Damaged vent details and cracked tile corners were addressed. The job included vent-cap replacement, sealing roof penetrations and tile repairs.
View repair photos
Austin, Texas
A targeted Austin roof repair addressing damaged shingles and deteriorated decking around a plumbing vent. Follow the documented work from exposed damage through decking replacement, underlayment and finished pipe flashing and shingles.
View repair photos
San Antonio, Texas
Targeted tile roof repairs at the front roof edge and roof-to-wall connection, including decking, fascia, soffit, flashing, siding and trim work.
View repair photosShowing 6 of 22 repair projects
Compare repair and replacement, learn about metal roofing, and see what shapes a roofing estimate in Central Texas.
Read the roof repair guideAsk about Acorn Finance and Wisetack when you discuss your roofing estimate.
Availability, approval and terms depend on the provider and lending partner.
Frequently asked questions
Eligible shingle systems can carry a manufacturer limited lifetime warranty with up to 50 years of non-prorated protection against manufacturing defects. Coverage depends on the selected products, property eligibility, installation requirements and warranty registration.
Compare GAF manufacturer warranty terms
| Roof or work | Coverage |
|---|---|
| Architectural shingles | 10 years |
| Three-tab shingles | 5 years |
| Roof repairs | 1 year |
| Exposed-fastener metal | 1 year |
| Standing seam metal | 10 years |
| Modified bitumen | 5 years |
| TPO | 10 years |
Our workmanship coverage is separate from manufacturer material coverage. Ask us to review the written terms and any exclusions for your project.
We typically respond within 10 minutes to 1 hour. Formal residential and commercial quotes can be ready within 24 hours. Timing depends on the project information and any inspection needed.
Yes. We welcome smaller repair requests as well as complex roof problems. Tell us the property’s city, the roof type if you know it, and what you have noticed. A photo is a useful starting point.
We inspect and repair leaks, storm-damaged shingles, flashing around chimneys and roof openings, metal panels and seams, flat-roof membranes, ventilation issues and related roof components. The inspection helps us define the work your roof needs.
Move valuables away from the leak and contain interior water if it is safe to do so. Arrange a roof inspection promptly. Tell us where the water appears and when it happens so we can investigate the source.
We look at the affected area and the condition around it. If a focused repair can address the cause, we explain that option. If the roof condition points to a larger scope, we explain why before you decide.
